提問 logic remote

[Crayl]

想问下老师，我的logic remote一直匹配不到我的logic，如下图，我看有人说可能是版本更新问题，我已经把两个软件都更新到最新却依然无法匹配。

 

[haozi]

我沒有在用Logic Remote，但找到官方的兩個解決方式跟一個早期的Ipad IOS更新的解決方式，請試試看。

參考網址 一

If you can't connect Logic Remote to your Mac - Apple Support

To connect Logic Remote to Logic Pro or GarageBand on your Mac, check network settings on your devices or remove previously connected control surfaces from Logic Pro.

support.apple.com

---

Before you check firewall and control surface settings, make sure your device running Logic Remote is on the same Wi-Fi network as your Mac:

• Connect to Wi-Fi on your iPhone, iPad, or iPod touch
• Connect to Wi-Fi on your Mac

Change the Firewall settings on your Mac
Firewall settings on your Mac might be blocking Logic Remote from connecting.

1. Choose System Preferences from the Apple menu .
2. Click Security & Privacy in the System Preferences window.
3. Click the Firewall tab in the Security & Privacy pane.
4. Click the lock icon at the bottom-left corner of the Firewall pane, then enter an administrator username and password.
5. Click the Firewall Options button.
6. Deselect the checkbox for "Block all incoming connections."
7. Click OK. Try connecting Logic Remote.

If you still can't connect, check to see if you have a TouchOSC device added in Logic Pro, then remove it if you do.
Remove TouchOSC device from Logic Pro
Logic Remote might not connect if you previously added a TouchOSC device as a control surface for Logic Pro.

1. Close Logic Remote.
2. Open Logic Pro X on your Mac.
3. Choose Logic Pro X > Control Surfaces > Setup.
4. Check to see if a TouchOSC device appears in the window. If so, select the device, press the Delete key, then click OK.
5. If there are other Logic Remotes in the window, delete them.
6. Try connecting Logic Remote.

---

參考網址二

Logic Remote doesn't connect to your Mac after update to iOS 8

After upgrading your iPad to iOS 8, Logic Remote does not connect with a Mac running Logic Pro X, GarageBand for Mac (v10.0 or later), or MainStage 3.

support.apple.com

Logic Pro X

1. Quit Logic Pro X if it's running.
2. In the Finder, choose Go > Go to Folder.
3. Type ~/Library/Preferences and click OK.
4. In the window that opens, locate the "com.apple.logic.pro.cs" file and delete it.
5. Restart your Mac.
6. Open Logic Pro X.
7. Open Logic Remote on your iPad.
8. Tap Logic Pro X in the Connect window on your iPad.
9. Confirm the connection in the Logic Remote connection dialog in Logic Pro X.

 

[Crayl]

感谢昊子老师，是系统防火墙问题，老师我对于sample这方面的插件功能和使用方式不太了解，看到你推荐过loop cloud这款，已经下载了，请问这款软体是可以直接提取插件里原有的sample直接到宿主里吗，还是也可以接受你录制的sample到这里面来进行修改然后再导入宿主？
第二个问题是像这款第三方sample软体并非宿主内建插件该如何导入到宿主里进行使用？

 

[haozi]

感谢昊子老师，是系统防火墙问题，老师我对于sample这方面的插件功能和使用方式不太了解，看到你推荐过loop cloud这款，已经下载了，请问这款软体是可以直接提取插件里原有的sample直接到宿主里吗，还是也可以接受你录制的sample到这里面来进行修改然后再导入宿主？
第二个问题是像这款第三方sample软体并非宿主内建插件该如何导入到宿主里进行使用？

我後來都只用ADSR的Sample Manager了，Loop Cloud我試用完就移除，因為我覺得功能太多，反而超過我的需求。
你提到的問題應該都可以達到，但我沒有實際使用經驗，你要自己實驗摟。

第二題，通常直接拖進DAW就可以了。